Search:
Asterisk codecs
Asterisk Codecs
Asterisk supports the following narrow-band and wideband (HD audio) codecs:- G.711 ulaw (as used in US)
- G.711 alaw (as used in Europe)
- G.722 - 16 kHz wideband codec; passthrough, playback and recording in Asterisk 1.4; full support incl. transcoding in Asterisk 1.6, a backport for 1.4 is available, or use this more up-to-date patch
- G.723.1 - pass-thru for people who need a license , free for other people
- G.726 - 32kbps only (16/24/32/40kbps supported in format_g726 for files); flawed until Asterisk 1.4 which corrected the implementation and introduced codec g726aal2 and setting g726nonstandard for backwards compatibility with Asterisk 1.2 installations
- G.729 - may require a license unless using pass-thru, free version available for use in countries without patents or for educational use only
- GSM
- iLBC
- LPC10 (not recommended!)
- Speex - configurable 4-48kbps, VBR, ABR, etc. see bug 2536. For Asterisk 1.4. there is patch 10519 available that adds wideband support for the OpenWengo software client
Use this commands in the Asterisk CLI for a detailed listing of the actual capabilities:
show codecs **
show translation
show translation recalc 10
- show codecs Screen output
Disclaimer: this command is for informational purposes only.
It does not indicate anything about your configuration.
INT BINARY HEX TYPE NAME DESC
1 (1 << 0) (0x1) audio g723 (G.723.1)
2 (1 << 1) (0x2) audio gsm (GSM)
4 (1 << 2) (0x4) audio ulaw (G.711 u-law)
8 (1 << 3) (0x8) audio alaw (G.711 A-law)
16 (1 << 4) (0x10) audio g726aal2 (G.726 AAL2)
32 (1 << 5) (0x20) audio adpcm (ADPCM)
64 (1 << 6) (0x40) audio slin (16 bit Signed Linear PCM)
128 (1 << 7) (0x80) audio lpc10 (LPC10)
256 (1 << 8) (0x100) audio g729 (G.729A)
512 (1 << 9) (0x200) audio speex (SpeeX)
1024 (1 << 10) (0x400) audio ilbc (iLBC)
2048 (1 << 11) (0x800) audio g726 (G.726 RFC3551)
4096 (1 << 12) (0x1000) audio g722 (G722)
65536 (1 << 16) (0x10000) image jpeg (JPEG image)
131072 (1 << 17) (0x20000) image png (PNG image)
262144 (1 << 18) (0x40000) video h261 (H.261 Video)
524288 (1 << 19) (0x80000) video h263 (H.263 Video)
1048576 (1 << 20) (0x100000) video h263p (H.263+ Video)
2097152 (1 << 21) (0x200000) video h264 (H.264 Video)
To tell which codec is being used for a specific call use one of the following CLI commands:
sip show channels
iax2 show channels
To use with allow and disallow, here is the association table:
G.711 ยต-law companding (Canada, Japan and US) = ulaw
G.711 A-law companding (rest of the world) = alaw
G.722 = g722 (don't confuse this with g722.1 or g722.2)
G.723.1 = g723.1 (pass-thru only)
G.726 = g726
G.729 = g729
GSM = gsm
iLBC = ilbc
LPC10 = lpc10
Speex = speex
ADPCM = adpcm
A typical use might be:
disallow=all
allow=alaw
allow=ulaw
File name extensions
Extensions for various encoded files in Asterisk- wav:
- pcm:
- gsm:
Packetization
Various clients support variable sample periods / packetization. Asterisk 1.2 and earlier only supports 20ms packetization in RTP-based protocols like SIP and MGCP, so you should configure your client to use this. However, iLBC with its 30 ms packets also works with Asterisk 1.2. 1.4 and later include support for variable packetization, either settable in the config or set automatically according to the SDP.See also:
- Asterisk cli show codecs
- Asterisk CLI: show translation
- Asterisk config codecs.conf: Mainly used for speex codec configuration
- asterisk-users posting: g722 and SIP_CODEC and negotiation
- bandwidth consumption
- Codecs
- Variable SIP_CODEC: Set the SIP codec for the inbound (=first) call leg (see channelvariables.txt or README.variables in 1.2); Asterisk 1.6.2 also comes with SIP_CODEC_OUTBOUND for the remote (=second) call leg.
- Asterisk | FAQ | Tips & Tricks
Page Changes
