Search:
     
3CX Phone System for Windows Download the Free Edition

E-Tech ATA VPAD002

Specificaties:


Easily upgrade your existing analogue telephone devices for Voice-over-ip calls! All-In-1 VoIP device with PSTN life line port and FXS port.

With this VoIP adapter you can connect to a VoIP provider of your choice.
There is no need to use a separate VoIP-telephone. Simply connect your standard (analogue) telephone, and start calling.

Incoming and outgoing POTS calls are still possible over the available life-line.

   * You can dail out over the old line using a prefix code.
   * Incoming calls on the life-line will ring on the connected telephone.

     (Using/connecting the life-line is optional, it is not needed for making VoIP calls.)

     â€¢ Easiest installation in the world! Simply insert the enclosed cd in the computer, select your voip provider from the list, fill in your voip-telno, username and password, and click "Finish"!
     â€¢ Supports SIP2.0, MGCP, H323, IAX2, N2P protocols (depending on installed firmware, SIP is default.)
     â€¢ TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP client, NTP, PPPoE,TFTP, etc.
     â€¢ Autodetect incoming calls on PSTN line or Voice-over-ip
     â€¢ Caller ID supported (ETSI / V.23, Please check you phone manual for compatibility.)
     â€¢ 1 x FXS port analogue telephone port
     â€¢ 1 x PSTN life line port
     â€¢ 2x LAN port
     â€¢ Only one handset needed to recieve and make both VoIP and classic PSTN calls.
     â€¢ Powerful digital signal processing (DSP) to ensure superb audio
     quality; advanced adaptive jitter control and packet loss concealment
     technology
     â€¢ Ultra compact (wallet size) and lightweight design, great companion
     for travelers
     â€¢ Support various vocoders including G.711 A-/U-law, G.723.1,
     G.729A/B, G.728, G.726, iLBC.
     â€¢ Support silence suppression and VAD, AGC and echo cancellation (G.168)
     â€¢ Support standard encryption and authentication (DIGEST using MD5 and MD5-sess)
     â€¢ Support automated NAT traversal without manual manipulation of firewall/NAT (STUN)
     â€¢ Support remote automated provisioning and software upgrade even through firewall/NAT to
     enable zero configuration and plug-and-dial for end users
     â€¢ Support device configuration via Web browser or central configuration file
     â€¢ Support DNS SRV Look Up
     â€¢ Built-in phone book to assign speed-dail numbers (up to 100 entries!)

E-Tech ATA VPAD002

Created by: psdata,Last modification on Tue 31 of Aug, 2010 [02:29 UTC] by admin


Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - support@voip-info.org

Page Changes | Comments

 





Search: