Search:
     
3CX Phone System for Windows Download the Free Edition

SN4554 configuration example R4.2

SmartNode 4554 patton configuration Example R4.2

The following script can be used to configure SN4554 R4.2 firmware to be used with asterisk.
It manages 2 BRI ISDN ports, through 2 SIP accounts that permit asterisk to select the BRI port to route the call to.


cli version 3.20
gui type basic
administrator admin password D2F2A1lO9/8= encrypted
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 192.168.0.1 port 123 version 4

system

 ic voice 0
   low-bitrate-codec g729

system
 clock-source 1 bri 0 0
 clock-source 2 bri 0 1

profile napt NAPT_WAN

profile ppp default

profile call-progress-tone IT_Dialtone
 play 1 200 425 -12
 pause 2 200
 play 3 600 425 -12
 pause 4 1000

profile call-progress-tone IT_Alertingtone
 play 1 1000 425 -12
 pause 2 4000

profile call-progress-tone IT_Busytone
 play 1 500 425 -12
 pause 2 500

profile tone-set default

profile tone-set IT
 map call-progress-tone dial-tone IT_Dialtone
 map call-progress-tone ringback-tone IT_Alertingtone
 map call-progress-tone busy-tone IT_Busytone
 map call-progress-tone release-tone IT_Busytone
 map call-progress-tone congestion-tone IT_Busytone

profile voip default
 codec 1 g711alaw64k rx-length 20 tx-length 20
 codec 2 g711ulaw64k rx-length 20 tx-length 20

profile voip VOIP
 codec 1 g729 rx-length 20 tx-length 20
 codec 2 g711alaw64k rx-length 20 tx-length 20
 codec 3 g711ulaw64k rx-length 20 tx-length 20
 dejitter-mode static
 dejitter-max-delay 120

profile pstn default

profile sip default

profile aaa default
 method 1 local
 method 2 none

context ip router

 interface IF_IP_WAN
   ipaddress dhcp
   use profile napt NAPT_WAN
   tcp adjust-mss rx mtu
   tcp adjust-mss tx mtu

context cs switch
 no digit-collection timeout
 no digit-collection terminating-char
 national-prefix 0
 international-prefix 00

 routing-table called-e164 uscente
   route default dest-interface IF_S0_00

 routing-table called-e164 entrante
   route default dest-interface IF_SIP_SERVICE

 interface isdn IF_S0_00
   route call dest-interface IF_SIP_SERVICE
   use profile tone-set IT
   caller-name

 interface isdn IF_S0_01
   route call dest-interface IF_SIP_SERVICE
   use profile tone-set IT

 interface sip IF_SIP_SERVICE
   bind gateway GW_SIP1
   service default
   route call dest-interface IF_S0_00
   address-translation incoming-call calling-e164 from-header
   address-translation incoming-call calling-name from-header
   address-translation incoming-call called-e164 to-header
   address-translation incoming-call called-uri to-header
               early-connect
               early-disconnect
   use profile voip VOIP

 interface sip IF_SIP_SERVICE_BIS
   bind gateway GW_SIP2
   service default
   route call dest-interface IF_S0_01
   address-translation incoming-call calling-e164 from-header
   address-translation incoming-call calling-name from-header
   address-translation incoming-call called-e164 to-header
   address-translation incoming-call called-uri to-header
               early-connect
               early-disconnect
   use profile voip VOIP

 service hunt-group SER_HG_PSTN_FALLBACK
   drop-cause normal-unspecified
   drop-cause no-circuit-channel-available
   drop-cause network-out-of-order
   drop-cause temporary-failure
   drop-cause switching-equipment-congestion
   drop-cause access-info-discarded
   drop-cause circuit-channel-not-available
   drop-cause resources-unavailable
   route call 1 dest-interface IF_SIP_SERVICE

context cs switch
 no shutdown

gateway sip GW_SIP1
 bind interface IF_IP_WAN router

 service default
   domain 192.168.0.1
   defaultserver manual 192.168.0.1 5060 loose-router
   registration manual 192.168.0.1 5060 use-default-server
   user 100 authenticate password D2F2A1lO9/8= encrypted register
   session-timer 3600

gateway sip GW_SIP1
 no shutdown

gateway sip GW_SIP2
 call-signaling-port 5062
 bind interface IF_IP_WAN router

 service default
   domain 192.168.0.1
   defaultserver manual 192.168.0.1 5060 loose-router
   registration manual 192.168.0.1 5060 use-default-server
   user 101 authenticate password D2F2A1lO9/8= encrypted register
   session-timer 3600

gateway sip GW_SIP2
 no shutdown

port ethernet 0 0
 bind interface IF_IP_WAN router
 no shutdown

port bri 0 0
 clock auto
 encapsulation q921

 q921
               protocol ptmp
   uni-side auto
   encapsulation q931

   q931
     protocol dss1
     uni-side user
     bchan-number-order descending
     encapsulation cc-isdn
     bind interface IF_S0_00 switch

port bri 0 0
 no shutdown

port bri 0 1
 clock auto
 encapsulation q921

 q921
   protocol pp
   uni-side auto
   encapsulation q931

   q931
     protocol dss1
     uni-side user
     bchan-number-order descending
     encapsulation cc-isdn
     bind interface IF_S0_01 switch

port bri 0 1
 no shutdown


Note: improvements and comments to this configuration script are welcome!

Other documentation


Created by: mesfet,Last modification on Wed 29 of Apr, 2009 [12:32 UTC]


Please update this page with new information, just login and click on the "Edit" or "Discussion" tab. Get a free login here: Register Thanks! - support@voip-info.org

Page Changes | Comments

 





Search: